Skip to Content

Camera CMOS OV7670 VGA 640X480 Without FiFo for Arduino

The OV7670 Camera Module is a compact, low-voltage image sensor that integrates a VGA camera and an image processor into a single chip. It communicates via the SCCB interface and supports various resolutions and formats with 8-bit output. Capable of capturing up to 30 frames per second, it gives users full control over image quality and transmission. OmmiVision’s advanced sensor technology enhances image clarity by minimizing optical and electronic artifacts, ensuring vivid and stable images.

Package Includes:

  • 1 x OV7670 Camera Module with FIFO

29.95 AED 29.95 AED Tax Included
29.95 AED Tax Included

Not Available For Sale

This combination does not exist.

Terms and Conditions
30-day money-back guarantee
Shipping: 2-3 Business Days

 

Features:

  • High Sensitivity: Performs well in low-light conditions.
  • Low Operating Voltage: Suitable for embedded systems.
  • SCCB Interface: Compatible with I2C communication.
  • AL422 3M-Bits FIFO: For efficient data buffering.
  • Multiple Output Formats: Raw RGB, RGB565/555/444, GRB4:2:2, YUV 4:2:2, YCbCr 4:2:2.
  • Resolution Options: Supports VGA, CIF, and resolutions down to 40 × 30.
  • Vario Pixel Method: Supports sub-sampling.
  • Automatic Image Control: AEC, AGC, AWB, ABF, ABLC.
  • Advanced Image Settings: Controls for saturation, hue, gamma, sharpness, and anti-blooming.
  • Built-in ISP: Handles noise reduction and defect correction.
  • Image Scaling and Lens Shading Correction.
  • Flicker Detection: Auto-detects 50Hz/60Hz flicker.
  • Automatic Enhancements: For color saturation, edge sharpening, and noise reduction.

Specifications:

  • IO Voltage: 2.5V to 3.0V
  • Operating Power: 60mW @ 15fps VGA YUV
  • Sleep Current: <20µA
  • Operating Temperature: -30°C to 70°C
  • Output Formats: YUV/YCbCr4:2:2, RGB565/555/444, GRB4:2:2, Raw RGB (8-bit)
  • Lens Size: 1/6"
  • Field of View: 25°
  • Maximum Frame Rate: 30fps (VGA)
  • Sensitivity: 1.3V / (Lux-sec)
  • Signal-to-Noise Ratio: 46 dB
  • Dynamic Range: 52 dB
  • Pixel Size: 3.6µm × 3.6µm
  • Dark Current: 12 mV/s @ 60°C

 

Features

  • LoRa SX1276 Wireless Module: Built around the SX1276 chip, the module employs LoRa technology, allowing for long-range data transmission and excellent penetration capabilities.
  • Configurable Output Power: The module's output power can be adjusted from +13 to +20 dBm (up to 100 mW) through software settings, providing flexibility in balancing communication distance and power consumption.
  • Low Power Consumption: During transmission, power consumption ranges from 50mA (+13 dBm) to 150mA (+20dBm), while in listening mode, it requires approximately 30mA, making it energy-efficient for battery-operated applications.
  • AES-128 Encryption Support: The module offers AES-128 encryption, ensuring secure and private data transmission, making it suitable for applications that require data confidentiality.
  • Multipoint Network Capabilities: It supports multipoint networks, allowing the establishment of individual nodes within the network for seamless and efficient communication.
  • Wide Power Supply Range: The module can be powered with a voltage range from 3V to 5V, making it compatible with various power sources and microcontrollers.

NOTE: It is important to solder a 16cm length of cable to the antenna pin before using it since not connecting any antenna can damage it. Optionally, the board has pads to solder an SMA connector with antenna thread.

Specifications

  • LoRa SX1276 wireless module with SPI interface (900 MHz)
  • Output power: +13 to +20 dBm up to 100 mW configurable by software
  • Consumption: 50mA (+13 dBm) to 150mA (+20dBm) in transmission, approx 30mA in listening
  • Supports AES-128 encryption
  • Supports multipoint networks with individual nodes
  • Power: 3 to 5V