Features:
- Minimal standard interface Linux development board
- Compact NGFF M.2 form factor
- Integrated WiFi and Linux system
- Low power consumption
- Comprehensive software and community support
- Cost-effective solution for IoT development
- Good signal stability and performance
- Suitable for embedded and IoT projects
Principle of Work:
The WRTnode2P operates as a Linux-based embedded system. The MT7628AN system-on-chip runs an embedded Linux distribution stored in onboard SPI flash memory. The processor manages networking, GPIO control, and peripheral communication while the integrated WiFi subsystem provides wireless connectivity in access point or station mode. Developers interact with the board through Linux tools, enabling rapid development of IoT gateways, routers, and smart devices.
Pinout of the Module:
The board exposes all functional signals through the NGFF M.2 connector, providing access to power, GPIO, communication interfaces, and control signals required for embedded system expansion.
Applications:
- IoT gateways
- Smart home controllers
- Wireless routers and access points
- Embedded Linux learning platforms
- Industrial IoT nodes
- Networked sensors and controllers
Technical Details:
- Chipset: MediaTek MT7628AN
- CPU Frequency: Up to 580 MHz
- RAM: 128 MB DDR2
- Flash Memory: 16 MB SPI Flash
- Wireless Standard: IEEE 802.11 b g n
- WiFi Configuration: 2T2R
- Operating Modes: Access Point and Station
- Form Factor: NGFF M.2
- Module Size: 22 mm x 42 mm
Comparisons:
Compared to traditional development boards, WRTnode2P offers a much smaller footprint and lower cost while still providing a full Linux environment and reliable WiFi performance. It is especially suitable for space-constrained and cost-sensitive IoT applications where larger single-board computers are not practical.
Features:
- Minimal standard interface Linux development board
- Compact NGFF M.2 form factor
- Integrated WiFi and Linux system
- Low power consumption
- Comprehensive software and community support
- Cost-effective solution for IoT development
- Good signal stability and performance
- Suitable for embedded and IoT projects
Principle of Work:
The WRTnode2P operates as a Linux-based embedded system. The MT7628AN system-on-chip runs an embedded Linux distribution stored in onboard SPI flash memory. The processor manages networking, GPIO control, and peripheral communication while the integrated WiFi subsystem provides wireless connectivity in access point or station mode. Developers interact with the board through Linux tools, enabling rapid development of IoT gateways, routers, and smart devices.
Pinout of the Module:
The board exposes all functional signals through the NGFF M.2 connector, providing access to power, GPIO, communication interfaces, and control signals required for embedded system expansion.
Applications:
- IoT gateways
- Smart home controllers
- Wireless routers and access points
- Embedded Linux learning platforms
- Industrial IoT nodes
- Networked sensors and controllers
Technical Details:
- Chipset: MediaTek MT7628AN
- CPU Frequency: Up to 580 MHz
- RAM: 128 MB DDR2
- Flash Memory: 16 MB SPI Flash
- Wireless Standard: IEEE 802.11 b g n
- WiFi Configuration: 2T2R
- Operating Modes: Access Point and Station
- Form Factor: NGFF M.2
- Module Size: 22 mm x 42 mm
Comparisons:
Compared to traditional development boards, WRTnode2P offers a much smaller footprint and lower cost while still providing a full Linux environment and reliable WiFi performance. It is especially suitable for space-constrained and cost-sensitive IoT applications where larger single-board computers are not practical.
