- All products
- Power
- Solar
- Solar Chargers & MPPT
- Battery Charging Module Solar MPPT Controller CN3722
- Solar Chargers & MPPT
Features
- MPPT Charging: Designed to track the solar panel's maximum power point to improve power extraction under changing sunlight conditions.
- Three-Series Battery Charging: For 3S lithium-ion battery packs with a nominal voltage of 10.8V or 11.1V.
- Constant-Current and Constant-Voltage Charging: Supports controlled charging of compatible battery packs.
- Buck Converter: Steps down the solar panel input voltage for battery charging.
- Compact Size: Measures approximately 45 × 31 mm.
- Maximum Charging Current: Specified up to 3A, subject to suitable cooling and operating conditions.
Principle of Operation

The CN3722 uses a switching buck converter and MPPT control to adjust the charging operation according to the solar panel's available power. It is intended to charge a three-series lithium-ion battery pack to a maximum voltage of 12.6V.
Applications
- Solar charging for compatible 3S lithium-ion battery packs
- Small solar-powered electronic projects
- DIY battery-powered equipment
- Low-voltage solar energy systems
Wiring

- IN+: Solar panel positive
- IN−: Solar panel negative
- BAT+: Battery pack positive
- BAT−: Battery pack negative
The module uses solder pads for electrical connections. Check the board markings before soldering and observe the correct polarity.
Specifications
- Controller IC: CN3722
- Input Source: Solar panel
- Recommended Panel Rating: 18V nominal; approximately 21V open-circuit voltage as stated by the supplier
- Maximum IC Input Voltage: 25V, according to the supplied description
- Battery Configuration: 3-series lithium-ion (3S)
- Battery Nominal Voltage: 10.8V or 11.1V
- Maximum Charging Voltage: 12.6V
- Maximum Specified Charging Current: 3A
- Cooling: Additional heat dissipation may be required at charging currents above 2A
- Connection Type: Solder pads
- Dimensions: Approximately 45 × 31 mm
Important Notes
- This module is intended for a 3S lithium-ion battery pack, not a single-cell battery or a 12V lead-acid battery.
- Use a compatible 3S battery pack and follow the manufacturer's charging and protection requirements. Do not assume this module replaces a battery protection or balancing circuit.
- Ensure the solar panel's maximum open-circuit voltage remains within the module's input rating, including under cold or bright conditions.
- The 3A rating depends on input power, temperature, and cooling. Provide adequate heat dissipation when required.
Features
- MPPT Charging: Designed to track the solar panel's maximum power point to improve power extraction under changing sunlight conditions.
- Three-Series Battery Charging: For 3S lithium-ion battery packs with a nominal voltage of 10.8V or 11.1V.
- Constant-Current and Constant-Voltage Charging: Supports controlled charging of compatible battery packs.
- Buck Converter: Steps down the solar panel input voltage for battery charging.
- Compact Size: Measures approximately 45 × 31 mm.
- Maximum Charging Current: Specified up to 3A, subject to suitable cooling and operating conditions.
Principle of Operation

The CN3722 uses a switching buck converter and MPPT control to adjust the charging operation according to the solar panel's available power. It is intended to charge a three-series lithium-ion battery pack to a maximum voltage of 12.6V.
Applications
- Solar charging for compatible 3S lithium-ion battery packs
- Small solar-powered electronic projects
- DIY battery-powered equipment
- Low-voltage solar energy systems
Wiring

- IN+: Solar panel positive
- IN−: Solar panel negative
- BAT+: Battery pack positive
- BAT−: Battery pack negative
The module uses solder pads for electrical connections. Check the board markings before soldering and observe the correct polarity.
Specifications
- Controller IC: CN3722
- Input Source: Solar panel
- Recommended Panel Rating: 18V nominal; approximately 21V open-circuit voltage as stated by the supplier
- Maximum IC Input Voltage: 25V, according to the supplied description
- Battery Configuration: 3-series lithium-ion (3S)
- Battery Nominal Voltage: 10.8V or 11.1V
- Maximum Charging Voltage: 12.6V
- Maximum Specified Charging Current: 3A
- Cooling: Additional heat dissipation may be required at charging currents above 2A
- Connection Type: Solder pads
- Dimensions: Approximately 45 × 31 mm
Important Notes
- This module is intended for a 3S lithium-ion battery pack, not a single-cell battery or a 12V lead-acid battery.
- Use a compatible 3S battery pack and follow the manufacturer's charging and protection requirements. Do not assume this module replaces a battery protection or balancing circuit.
- Ensure the solar panel's maximum open-circuit voltage remains within the module's input rating, including under cold or bright conditions.
- The 3A rating depends on input power, temperature, and cooling. Provide adequate heat dissipation when required.